|
Printing Blankets
Textile printing
blanket, Type “MATLON PRINT 6488-2.65E”
European
high quality blanket
|
Coating
|
Bottom side
|
Top face
|
|
Construction
|
urethane-impregnated
|
urethane, approx.
0.4mm
|
|
Colour
|
transparent
|
black
|
|
Texture
|
fabric
|
matt
|
Tension
member laterally stiff fabric of
polyester warp and weft
2 fabric files
Special
construction bottom side fabric in low-noise
twill weave
Technical data
Thickness 2.65
mm
+/- 0.10 mm
Weight approx. 3 kg/m2
Working temperature tolerated approx. –30°C to +70°C
Shore hardness of top face coating approx. 92 (Shore A as per DIN 53
605)
Electrostatic properties
antistatic
Delivery width up to
max. 4’500 mm
Belt support
Slider bed
(support rollers acceptable) Splice special
splicing instruction S001 for printing
blankets
Applications
- rotary printing machines
-
flat bed printing machines
-
short flat bed printing machines max. 50m belt length, coupon/sample
printing
Chemical resistance
- resistant to all solids, dirt, water, oils,
salt, cleaning agents such as soap or sulonates,
ethyl or buthyl, acetate
whit apirts, ethyl alcohol, benzine
- brief contact with acetone, MEK, toluol and
similar ketones possible
-
not reisitant to strong acids and chlorinated solvente
Position of the pitch line: 1.2 mm +/- 0.05 mm
Applications
 
Rotary Printing machine Flat
Bed Printing machine
 
Ink Jet printing machine
Splicing technics
Splicing can be made in
Bangkok in our work shop on spot or on machine or in any plants.
Required time: 5 – 6 hours
Personal: 1 – 2 specialists and 2 local help
assistants
Equipment: our own developed quality equipment,
presses, knifes, etc.
Repair work
Repair work on used,
defective blanket also in Rubber quality
-
in our work shop
-
on spot, on machine (up to 2m wide blankets)
 
 
|
Akaram Ltd.
